How To Clean The Dirt Inside The Submersible Pump?

Jan 26, 2021

For users of submersible pumps, they should know that scaling of submersible pumps is prone to occur when they are used for a long time. How to solve this problem? Let's discuss it together.

1. Dip cotton or silk cloth with a small amount of acetone or carbon tetrachloride to clean the surface of the parts one by one. Do not use cotton yarn to prevent cotton yarn fine hair from being brought into the submersible pump body.

2. In the initial washing, in order to save money, you can first use recycled gasoline, then use washing gasoline, and then use aviation gasoline to clean it. Then check the damage and scratches carefully.

3. If rusty or burr parts are found, use oilstone or metallographic sandpaper to gently polish them to remove rust spots and burrs. Pay attention to the smoothness and smoothness of the parts.

4. Remember to dry the parts after cleaning (blowing or wiping with silk cloth and then dry) and cover them to prevent dust falling. If there are parts on the submersible pump waiting to be repaired and processed, other parts can be properly coated with clean vacuum pump oil to prevent rust.

5. For the through holes, oil grooves, and gas passages of the oil passages, all the particulate impurities, dust, dirt, and oil residues accumulated in them should be cleaned, and the crusted areas should be gently removed. Use compressed air to blow the oil path through and dry, and make sure that gasoline and solvent for cleaning do not accumulate in the grooves of the oil path.

6. Do a good job of cleaning up the submersible pump to reduce dirt and reduce the efficiency of the equipment.