On The Depth Of High Temperature Resistant Submersible Pump in Hot Spring Well

Nov 18, 2021

From wells with different water temperatures, choose your own suitable hot water submersible pump for temperature resistant wells. Different temperature resistant sections require different water entry depths into deep wells. The water entry depth is directly related to the service life of the hot water pump.

After years of experience, it is found that the water depth plays a decisive role in the submersible pump; Inflow depth refers to (the inflow depth below the dynamic water level of the well):

1. Below 80 ℃ - more than 50m above the dynamic water level;

2. 80-100 ℃ - more than 100m above the dynamic water level;

3. 100-125 ℃ is more than 100m above the dynamic water level;

You may worry that the extra tens of meters will lead to more equipment costs: tens of meters of pipes and tens of meters of cables; Think about it in another way. If the well is replaced with a hot water submersible pump, it will cost much more than this; No matter how easy it is to use the high-temperature submersible pump, it should also be used according to the regulations. After all, the specified use specification is good, isn't it? I hope you can see this article if you need to buy a well hot water submersible pump, so that we can rest assured in use.