Submersible Sewage Pump Characteristics And Conditions Of Use

Sep 07, 2022

Product features of submersible sewage pump

1. The double-blade impeller structure is adopted, which greatly improves the passage capacity of dirt.

2. The mechanical seal adopts a new type of grinding pair, and runs in the oil chamber for a long time;

3. The overall structure is compact, the volume is small, the noise is low, the energy saving effect is remarkable, the maintenance is convenient, and the user is convenient to replace;

4. The automatic control cabinet can automatically control the overrun and stop of the pump according to the required liquid level change, without the need for special personnel, and it is extremely convenient to use;

5. The installation method can be equipped according to the user's needs, which brings great convenience to installation and maintenance, and people do not need to do this and enter the sump;

6. It can be used within the design range without overloading the motor;

7. The mechanical seal adopts a new type of hard and corrosion-resistant titanium tungsten material, which can make the pump run safely and continuously for more than 8,000 hours.

Conditions of use of WQ series non-clogging fixed submersible sewage pump

1. Sewage pump series products are applicable when the rated voltage is 380V and the power frequency is 50Hz

2. The temperature of the medium does not exceed 40 degrees Celsius, the density of the medium is less than or equal to 1150kg/m3, and the PH value is in the range of 5-9;

3. The altitude does not exceed 1000 meters;

4. The annual viscosity of the conveying medium should not exceed 1000CP;

5. The product must be fully submerged in the water during operation, but the diving depth shall not exceed 10m;

6. The product material is mainly cast iron and cannot be used in strongly corrosive or highly corrosive media;