How To Add Oil To The Bearings Of The Centrifugal Pump?

Oct 27, 2024

The bearings of a centrifugal split case pump are usually lubricated with grease, and the oiling method is as follows:

Open the bottom cover plate of the centrifugal split case pump and locate the position of the bearing chamber.

Remove the bearing seat of the centrifugal split case pump and detach the bearing from the bearing seat.

Add grease to the bearings and inject the grease into the designated location. It is recommended to use lithium based or 2-lithium based grease, and lubricating oil can also be used, but lubricating base oil or white oil cannot be used.

Replace the bearing with the bearing seat and install the bearing seat onto the centrifugal split case pump.

It should be noted that different models of centrifugal split case pumps may have different refueling methods, so it is best to check the equipment's user manual or relevant maintenance information before refueling to ensure the correct refueling method.