Can Vertical Deep Well Submersible Pumps Be Used Horizontally?

Jul 01, 2024

Deep well pumps can be used in a suspended or inclined manner, but it is not recommended to use a lying type.
1, Suspended use
The suspended use of deep well pumps is a common method of use, which can maintain the vertical state of the pump and is beneficial for the efficiency of water transportation. When using a suspended deep well pump, the following points should be noted:
1. The suspension point should be at the top of the pump body or the junction between the pump body and the motor, which can avoid bending and vibration of the pump body, and prevent water leakage, abnormal noise, and other situations of the pump.
2. The position of the suspension point should be adjusted appropriately, not too high or too low, to ensure smooth operation of the pump.
2, Lying down for use
Lying down is the use of placing a deep well pump at the bottom of the well or pool, which can reduce the hanging depth of the pump and facilitate maintenance, but it is not the best choice. The reason is:
1. The operation of the water pump generates a large amount of heat. If placed at the bottom of the well or pool, the heat is not easily dissipated, which can cause the pump to overheat and burn out.
When used in a lying position, the inlet of the water pump is located at the bottom, which is prone to contamination and shortens the lifespan of the water pump.
3, Tilted use
Oblique use refers to placing a deep well pump at an angle at the bottom of the well or pool, which can make the pump perpendicular to the ground without occupying the wellhead. The inclination angle is generally around 30 degrees, and the specific angle should be determined based on the depth of the well and the working conditions.
When using, the pump body should be kept parallel to the motor, and the suspension point should be at the top of the pump body or the junction between the pump body and the motor. This usage method can balance the heat dissipation and operational efficiency of the water pump, making it a relatively ideal approach.
In summary, deep well pumps can be used in a suspended or inclined position, but it is not recommended to use a lying position. When using deep well pumps, appropriate usage methods should be selected according to the specific situation to ensure the long-term stable operation of the pump.