Detailed Explanation Of Parameter Codes For Fire Fighting Pump Control Cabinet

Oct 16, 2024

1, Parameter code of fire fighting pump control cabinet
The following are common parameter codes for fire fighting pump control cabinets:

Meaning of parameter codes

FV0- Fire Water Tank Low Water Level Low Water Level Signal

FV1- Fire Water Tank High Water Level High Water Level Signal

FV2- Low and Low Pressure Signal for Inlet Pressure

FV3- Soft Start Soft Start Signal

FV4- Operation Indication Conventional Indication

FVA Hand Automatic Switching Signal

FVB Fire Automatic Switching Automatic Switching Signal

FVC emergency activation signal

2, Explanation of Parameter Code Meaning
1. Low water level signal: indicates that the water level in the fire water tank is below the set value and needs to be replenished with water.

2. High water level signal: indicates that the water level in the fire water tank is higher than the set value and the water supply needs to be stopped.

3. Low pressure signal: Due to insufficient flow or pump failure, if the inlet pressure is lower than the set value, the operation needs to be stopped.

4. Soft start signal: When the power supply voltage is unstable or cold start occurs, soft start control is required to protect the equipment.

5. General instructions: Display the working status of the control cabinet.

6. Switching signal: Manually switch the operating mode.

7. Automatic switching signal: Automatic control operation mode.

8. Emergency activation signal: In case of emergency, manually activate the control cabinet to ensure safety.

3, Summary
The above is a detailed introduction to the parameter codes and corresponding meanings of common fire fighting pump control cabinets. Mastering these codes can help users better understand the working principle and operating status of the fire fighting pump control cabinet, improving efficiency and safety.