How About High Chromium Wear-resistant Alloy Slurry Pump

Nov 20, 2025

The high chromium wear-resistant alloy slurry pump is a single-stage single suction, axial suction cantilever horizontal centrifugal pump, which can be widely used in metallurgy, mining, power, coal mining, water conservancy, chemical industry, light industry, petroleum and other sectors to transport abrasive or corrosive slurry containing a large amount of solid materials.
1. The overcurrent components of the high chromium wear-resistant alloy slurry pump are made of high-strength wear-resistant materials, suitable for conveying slurry with strong abrasion, high concentration, and large particles. Within the maximum working pressure range of the pump, it can be used in series in multiple stages.
2. The high chromium wear-resistant alloy slurry pump has interchangeable overcurrent components made of various materials according to the different suction media, suitable for conveying abrasive or corrosive, large or fine particle slurry.
The high chromium wear-resistant alloy slurry pump product has significant characteristics such as high efficiency, light weight, low noise, reliable operation, long service life, and easy maintenance.

 

The high chromium wear-resistant alloy slurry pump is a single-stage single suction centrifugal slurry pump. The pump body adopts an inner and outer double-layer metal structure, and the pump casing is vertically open. The outlet can rotate eight different positions at 45 ° intervals.  
The medium being processed is an abrasive or corrosive slurry containing solid particles, with a solid-liquid mixing ratio of 45% for mortar and 60% for slurry. The medium temperature is ≤ 60 ℃, and the pump can be used in series in multiple stages. The slurry pump has a reasonable structure, reliable operation, and easy maintenance, and is suitable for industries such as power, metallurgy, coal, and building materials.
The overcurrent components of the high chromium wear-resistant alloy slurry pump are made of high hardness alloy cast iron or rubber, and can be widely used in industries such as steel, metallurgy, mining, power, coal, and building materials. They are used to transport abrasive or corrosive slurry, mortar, and ore slurry, with weight concentrations of up to 45% -60%.
For different process requirements, the high chromium wear-resistant alloy slurry pump can also adopt a multi-stage series parallel or composite operation mode.
The design of the high chromium wear-resistant alloy slurry pump series products is divided into single-stage, single suction, and centrifugal slurry pumps.

 

Divided into horizontal and vertical structures. Horizontal pumps are divided into various specifications based on outlet diameter, such as 350, 300, 250, 200, 250, 100, 80, 65, 50, 40mm, etc; Each specification of pump has different impeller diameters to choose from according to needs.
The high chromium wear-resistant alloy slurry pump adopts a dual pump casing structure, which means that the front and rear pump casings have replaceable metal liners, including front and rear protective plates, sheaths, and impellers. The front and rear pump casings are vertically split structures, made of ordinary gray cast iron, ductile iron, or cast steel, respectively. The front and rear pump casings are connected by bolts, and the rear pump casing is connected to a bracket with a stopper. The discharge port of the pump can generally rotate 360 degrees in eight directions. The front and rear cover plates of the slurry pump impeller are equipped with back blades to reduce leakage, improve the service life and efficiency of the pump. The impeller of the high chromium wear-resistant alloy slurry pump is connected to the shaft by threads, which makes disassembly and assembly easier.